Quantcast

Magnetic fastener

Imported: 25 Feb '17 | Published: 06 Aug '02

Yoshihiro Aoki

USPTO - Design Patents

Description

FIG. 1 is a front elevational view of a magnetic fastener showing the

1st embodiment of my new design, with the rear elevational view being identical thereto;

FIG. 2 is a left side elevational view with the right side elevational view being identical thereto;

FIG. 3 is a top plan view thereof;

FIG. 4 is a bottom plan view thereof,

FIG. 5 is a front elevational view of the front member of the magnetic fastener shown in FIG. 1, detached from the rear member, with the rear elevational view being identical thereto;

FIG. 6 is a left side elevational view with the right side elevational view being identical thereto;

FIG. 7 is a top plan view thereof corresponding to FIG. 3;

FIG. 8 is a bottom plan view thereof;

FIG. 9 is a front elevational view of the rear member of the magnetic fastener shown in FIG. 1, detached from the front member, with the rear elevational view being identical thereto;

FIG. 10 is a left side elevational view with the right side elevational view being identical thereto;

FIG. 11 is a top plan view thereof;

FIG. 12 is a bottom plan view thereof corresponding to FIG. 4;

FIG. 13 is a front elevational view of magnetic fastener showing the

2nd embodiment of my new design, with the rear elevational view being identical thereto;

FIG. 14 is a left side elevational view with the right side elevational view being identical thereto;

FIG. 15 is a top plan view thereof;

FIG. 16 is a bottom plan view thereof;

FIG. 17 is a front elevational view of the front member of the magnetic fastener shown in FIG. 13, detached from the rear member, with the rear elevational view being identical thereto;

FIG. 18 is a left side elevational view with the right side elevational view being identical thereto;

FIG. 19 is a top plan view thereof corresponding to FIG. 15;

FIG. 20 is a bottom plan view thereof;

FIG. 21 is a front elevational view of the rear member of the magnetic fastener shown in FIG. 13, detached from the front member, with the rear elevational view being identical thereto;

FIG. 22 is a left side elevational view with the right side elevational view being identical thereto;

FIG. 23 is a top plan view thereof;

FIG. 24 is a bottom plan view thereof corresponding to FIG. 16;

FIG. 25 is a front elevational view of a magnetic fastener showing the

3rd embodiment of my new design, with the rear elevational view being identical thereto;

FIG. 26 is a left side elevational view with the right side elevational view being identical thereto;

FIG. 27 is a top plan view thereof;

FIG. 28 is a bottom plan view thereof;

FIG. 29 is a front elevational view of the front member of the magnetic fastener shown in FIG. 25, detached from the rear member, with the rear elevational view being identical thereto;

FIG. 30 is a left side elevational view with the right side elevational view being identical thereto;

FIG. 31 is a top plan view thereof corresponding to FIG. 27;

FIG. 32 is a bottom plan view thereof;

FIG. 33 is a front elevational view of the rear member of the magnetic fastener shown in FIG. 25, detached from the front member, with the rear elevational view being identical thereto;

FIG. 34 is a left side elevational view with the right side elevational view being identical thereto;

FIG. 35 is a top plan view thereof;

FIG. 36 is a bottom plan view thereof corresponding to FIG. 28;

FIG. 37 is a front elevational view of a magnetic fastener showing the

4th embodiment of my new design, with the rear elevational view being identical thereto;

FIG. 38 is a left side elevational view with the right side elevational view being identical thereto;

FIG. 39 is a top plan view thereof;

FIG. 40 is a bottom plan view thereof;

FIG. 41 is a front elevational view of the front member of the magnetic fastener shown in FIG. 37, detached from the rear member, with the rear elevational view being identical thereto;

FIG. 42 is a left side elevational view with the right side elevational view being identical thereto;

FIG. 43 is a top plan view thereof corresponding to FIG. 39;

FIG. 44 is a bottom plan view thereof;

FIG. 45 is a front elevational view of the rear member of the magnetic fastener shown in FIG. 37, detached from the front member, with the rear elevational view being identical thereto;

FIG. 46 is a left side elevational view with the right side elevational view being identical thereto;

FIG. 47 is a top plan view thereof;

FIG. 48 is a bottom plan view thereof corresponding to FIG. 40;

FIG. 49 is a front elevational view of a magnetic fastener showing the

5th embodiment of my new design, with the rear elevational view being identical thereto;

FIG. 50 is a left side elevational view with the right side elevational view being identical thereto;

FIG. 51 is a top plan view thereof;

FIG. 52 is a bottom plan view thereof;

FIG. 53 is a front elevational view of the front member of the magnetic fastener shown in FIG. 49, detached from the rear member, with the rear elevational view being identical thereto;

FIG. 54 is a left side elevational view with the right side elevational view being identical thereto;

FIG. 55 is a top plan view thereof corresponding to FIG. 51;

FIG. 56 is a bottom plan view thereof;

FIG. 57 is a front elevational view of the rear member of the magnetic fastener shown in FIG. 49, detached from the front member, with the rear elevational view being identical thereto;

FIG. 58 is a left side elevational view with the right side elevational view being identical thereto;

FIG. 59 is a top plan view thereof;

FIG. 60 is a bottom plan view thereof corresponding to FIG. 52;

FIG. 61 is a front elevational view of a magnetic fastener showing the

6th embodiment of my new design, with the rear elevational view being identical thereto;

FIG. 62 is a left side elevational view with the right side elevational view being identical thereto;

FIG. 63 is a top plan view thereof;

FIG. 64 is a bottom plan view thereof;

FIG. 65 is a front elevational view of the front member of the magnetic fastener shown in FIG. 61, detached from the rear member, with the rear elevational view being identical thereto;

FIG. 66 is a left side elevational view with the right side elevational view being identical thereto;

FIG. 67 is a top plan view thereof corresponding to FIG. 63;

FIG. 68 is a bottom plan view thereof;

FIG. 69 is a front elevational view of the rear member of the magnetic fastener shown in shown in FIG. 61, detached from the front member, with the rear elevational view being identical thereto;

FIG. 70 is a left side elevational view with the right side elevational view being identical thereto;

FIG. 71 is a top plan view thereof;

FIG. 72 is a bottom plan view thereof corresponding to FIG. 64;

FIG. 73 is a front elevational view of a magnetic fastener showing the

7th embodiment of my new design, with the rear elevational view being identical thereto;

FIG. 74 is a left side elevational view with the right side elevational view being identical thereto;

FIG. 75 is a top plan view thereof;

FIG. 76 is a bottom plan view thereof;

FIG. 77 is a front elevational view of the front member of the magnetic fastener shown in FIG. 73, detached from the rear member, with the rear elevational view being identical thereto;

FIG. 78 is a left side elevational view with the right side elevational view being identical thereto;

FIG. 79 is a top plan view thereof corresponding to FIG. 75;

FIG. 80 is a bottom plan view thereof;

FIG. 81 is a front elevational view of the rear member of the magnetic fastener shown in FIG. 73, detached from the front member; with the rear elevational view being identical thereto;

FIG. 82 is a left side elevational view with the right side elevational view being identical thereto;

FIG. 83 is a top plan view thereof;

FIG. 84 is a bottom plan view thereof corresponding to FIG. 76;

FIG. 85 is a front elevational view of a magnetic fastener showing the

8th embodiment of my new design, with the rear elevational view being identical thereto;

FIG. 86 is a left side elevational view with the right side elevational view being identical thereto;

FIG. 87 is a top plan view thereof;

FIG. 88 is a bottom plan view thereof;

FIG. 89 is a front elevational view of the front member of the magnetic fastener shown in FIG. 85, detached from the rear member, with the rear elevational view being identical thereto;

FIG. 90 is a left side elevational view with the right side elevational view being identical thereto;

FIG. 91 is a top plan view thereof corresponding to FIG. 87;

FIG. 92 is a bottom plan view thereof;

FIG. 93 is a front elevational view of the rear member of the magnetic fastener shown in FIG. 85, detached from the front member, with the rear elevational view being identical thereto;

FIG. 94 is a left side elevational view with the right side elevational view being identical thereto;

FIG. 95 is a top plan view thereof;

FIG. 96 is a bottom plan view thereof corresponding to FIG. 88;

FIG. 97 is a front elevational view of a magnetic fastener showing the

9th embodiment of my new design, with the rear elevational view being identical thereto;

FIG. 98 is a left side elevational view with the right side elevational view being identical thereto;

FIG. 99 is a top plan view thereof;

FIG. 100 is a bottom plan view thereof;

FIG. 101 is a front elevational view of the front member of the magnetic fastener shown in FIG. 97, detached from the rear member, with the rear elevational view being identical thereto;

FIG. 102 is a left side elevational view with the right side elevational view being identical thereto;

FIG. 103 is a top plan view thereof corresponding to FIG. 99;

FIG. 104 is a bottom plan view thereof;

FIG. 105 is a front elevational view of the rear member of the magnetic fastener shown in FIG. 97, detached from the front member, with the elevational view being identical thereto;

FIG. 106 is a left side elevational view with the right side elevational view being identical thereto;

FIG. 107 is a top plan view thereof;

FIG. 108 is a bottom plan view thereof corresponding to FIG. 100;

FIG. 109 is a front elevational view of a magnetic fastener showing the

10th embodiment of my new design, with the rear elevational view being identical thereto;

FIG. 110 is a left side elevational view with the right side elevational view being identical thereto;

FIG. 111 is a top plan view thereof;

FIG. 112 is a bottom plan view thereof;

FIG. 113 is a front elevational view of the front member of the magnetic fastener shown in FIG. 109, detached from the rear member, with the rear elevational view being identical thereto;

FIG. 114 is a left side elevational view with the right side elevational view being identical thereto;

FIG. 115 is a top plan view thereof corresponding to FIG. 111;

FIG. 116 is a bottom plan thereof;

FIG. 117 is a front elevational view of the rear member of the magnetic fastener shown in FIG. 109, detached from the front member, with the rear elevational view being identical thereto;

FIG. 118 is a left side elevational view with the right side elevational view being identical thereto;

FIG. 119 is a top plan view thereof;

FIG. 120 is a bottom plan view thereof corresponding to FIG. 112;

FIG. 121 is a front elevational view of a magnetic fastener showing the

11th embodiment of my new design, with the rear elevational view being identical thereto;

FIG. 122 is a left side elevational view with the right side elevational view being identical thereto;

FIG. 123 is a top plan view thereof;

FIG. 124 is a bottom plan view thereof;

FIG. 125 is a front elevational view of the front member of the magnetic fastener shown in FIG. 121, detached from the rear member, with the rear elevational view being identical thereto;

FIG. 126 is a left side elevational view with the right side elevational view being identical thereto;

FIG. 127 is a top plan view thereof corresponding to FIG. 123;

FIG. 128 is a bottom plan view thereof;

FIG. 129 is a front elevational view of the rear member of the magnetic fastener shown in FIG. 121, detached from the front member, with the rear elevational view being identical thereto;

FIG. 130 is a left side elevational view with the right side elevational view being identical thereto;

FIG. 131 is a top plan view thereof;

FIG. 132 is a bottom plan view thereof corresponding to FIG. 124;

FIG. 133 is a front elevational view of a magnetic fastener showing the

12th embodiment of my new design, with the rear elevational view being identical thereto;

FIG. 134 is a left side elevational view with the right side elevational view being identical thereto;

FIG. 135 is a top plan view thereof;

FIG. 136 is a bottom plan view thereof;

FIG. 137 is a front elevational view of the front member of the magnetic fastener shown in FIG. 133, detached from the rear member, with the rear elevational view being identical thereto;

FIG. 138 is a left side elevational view with the right side elevational view being identical thereto;

FIG. 139 is a top plan view thereof corresponding to FIG. 135;

FIG. 140 is a bottom plan view thereof;

FIG. 141 is a front elevational view of the rear member of the magnetic fastener shown in FIG. 133, detached from the front member, with the rear elevational view being identical thereto;

FIG. 142 is a left side elevational view with the right side elevational view being identical thereto;

FIG. 143 is a top plan view thereof; and,

FIG. 144 is a bottom plan view thereof corresponding to FIG. 136.

The elements are shown detached for clarity of illustration.

Claims

The ornamental design for a magnetic fastener, as shown and described.