Complementary Metal Oxide Semiconductor-Compatible, High-Mobility, -Oriented GaSb Nanowires Enabled by Vapor-Solid-Solid Chemical Vapor Deposition.

Research paper by Zai-Xing ZX Yang, Lizhe L Liu, SenPo S Yip, Dapan D Li, Lifan L Shen, Ziyao Z Zhou, Ning N Han, Tak Fu TF Hung, Edwin Yue-Bun EY Pun, Xinglong X Wu, Aimin A Song, Johnny C JC Ho

Indexed on: 30 Mar '17Published on: 30 Mar '17Published in: ACS Nano


Using CMOS-compatible Pd catalysts, we demonstrated the formation of high-mobility <111>-oriented GaSb nanowires (NWs) via vapor-solid-solid (VSS) growth by surfactant-assisted chemical vapor deposition through a complementary experimental and theoretical approach. In contrast to NWs formed by the conventional vapor-liquid-solid (VLS) mechanism, cylindrical-shaped Pd5Ga4 catalytic seeds were present in our Pd-catalyzed VSS-NWs. As solid catalysts, stoichiometric Pd5Ga4 was found to have the lowest crystal surface energy and thus giving rise to a minimal surface diffusion as well as an optimal in-plane interface orientation at the seed/NW interface for efficient epitaxial NW nucleation. These VSS characteristics led to the growth of slender NWs with diameters down to 26.9 ± 3.5 nm. Over 95 % high crystalline quality NWs were grown in <111> orientation for a wide diameter range of between 10 and 70 nm. Back-gated field-effect transistors (FETs) fabricated using the Pd-catalyzed GaSb NWs exhibit a superior peak hole mobility of ~330 cm(2)V(-1)s(-1), close to the mobility limit for a NW channel diameter of ~30 nm with a free carrier concentration of ~10(18) cm(-3). This suggests that the NWs have excellent homogeneity in phase purity, growth orientation, surface morphology and electrical characteristics. Contact printing process was also used to fabricate large-scale assembly of Pd-catalyzed GaSb NW parallel arrays, confirming the potential constructions and applications of these high-performance electronic devices.